13 |
P a g e
SCH305 to SCH305
Parts needed:
•
(1) Cat.5e Crossover Cable*, any length
Setup:
Connect each end of a Cat.5e Crossover Cable directly to an
SCH305 ComHub using each device’s Tether Port.
*Please note
: the Cat.5e Crossover Cable is a specialized cable. Must
use a "crossover" cable. A standard Cat.5e cable will not work for this
application.
IMPORTANT NOTES ABOUT TETHERING:
A minimum of seven (7) feet of separation between the two ComHubs is
recommended.
When ComHubs are tethered, portable radio push-to-talk functionality
is altered: For example:
•
With two SCH305 ComHubs tethered together, only one
portable radio may be connected to one of the two ComHubs,
for successful radio push to talk communication.
•
With an SCH305 ComHub tethered to a SCH310T ComHub, a
portable radio can only be interfaced to the SCH305 (not the
SCH310T). Users paired to the SCH305 ComHub can hear and
transmit over the radio using the Push-to-Talk Button on their
headsets. The users paired to the SCH310T ComHub will be able
to talk in full duplex mode with users from both ComHubs and
hear the portable radio communication, however they
will not
be able to push-to-talk over the connected portable radio.
