8 |
P a g e
ComHub Controls
•
Power Button
– Turns the ComHub off and on.
•
Charge LED
– Indicates when the ComHub is actively charging.
•
Status LED
– Indicates when the charge cycle is complete. It also
indicates the battery level during use.
•
Charge Port
– Connects to an external power supply to charge
the ComHub batteries.
•
PR Connector
– Used to connect a portable radio to the
ComHub.
•
External Antenna Ports
– Connects accessory external
antennas.
Connecting a Portable Radio
The SCH310/T ComHub can be connected to a variety of handheld
portable radios using Portable Radio (PR) cables. For details, visit
www.soneticscorp.com/accessories/portable-radio-adapters/
NOTE:
When two SCH310T ComHubs are tethered, neither ComHub will
allow users to transmit via headset PTT over the portable radio.
Installing a PR Cable
•
Once you have selected the correct PR Cable for your
application, attach the end that looks like the image above.
•
Use your Sonetics screwdriver to tighten the screw on the
connector to the ComHub.
CAUTION:
Overtightening can
damage the connector.
•
Connect the other end of the PR Cable to your radio.
POWER
BUTTON
POWER
LED
CHARGE
PORT
EXTERNAL
ANTENNA PORT
EXTERNAL
ANTENNA PORT
STATUS LED
INTERCOM PORT