background image

26 | 

P a g e

 

 

Sonetics Standard Limited Warranty

 

Sonetics Corporation (“Sonetics”) warrants to the original purchaser of its products that products 
will be free from defects in materials and workmanship under normal and proper use for the period 
of 

one (1) year

 from date of purchase.  

Sonetics Corporation will repair or replace, at its option, any products showing factory defects 
during this warranty period, subject to the following provisions and obligations:  
1.

 

This warranty applies only to a new product sold through authorized channels of distribution.  

2.

 

All work under warranty must be performed by Sonetics Corporation or Sonetics Authorized 
Service Center.  

3.

 

All returned products must be shipped to our address, freight prepaid and Sonetics will return 
products to customer via ground freight. Any expedite fees or additional freight charges will be 
charged to customer.  

4.

 

Any attempt to repair, service, or alter the product in any way voids this warranty.  

5.

 

This warranty does not apply in the event of accident, abuse, misuse, liquid contact, improper 
installation, unauthorized repair, tampering, modification, fire, earthquake, or damage from 
other external sources – including damage caused by user-replaceable parts.  

6.

 

This warranty does not apply: (a) to consumable parts such as batteries, ear seals, intercom 
bags, cables, external power supplies, parts listed as accessories to a system, or other parts 
designed to diminish in function over time unless a failure is due to a defect in materials or 
workmanship; (b) to cosmetic damage or to defects caused by normal wear and tear or aging of 
the product; (c) to damage caused by use with non-Sonetics products; (d) to damage caused by 
operating the product outside the permitted or intended uses or environments described by 
Sonetics; (e) to damage caused by service performed by anyone who is not a representative of 
Sonetics or an Sonetics Authorized Service Provider; (f) to a product or part that has been 
modified without the written permission of Sonetics; (g) if any Sonetics serial number has been 
removed or defaced.  

7.

 

This warranty does not extend to any other equipment, apparatus, vehicle, aircraft, or 
watercraft to which this product may be attached or connected.  

THE FOREGOING IS YOUR SOLE REMEDY FOR FAILURE IN SERVICE OR DEFECTS. SONETICS 
CORPORATION SHALL NOT BE LIABLE UNDER THIS OR ANY IMPLIED WARRANTY FOR INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, NOR FOR ANY INSTALLATION OR REMOVAL COSTS OR OTHER 
SERVICE FEES. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS OF USE, WHICH ARE HEREBY 
EXCLUDED. TO THE EXTENT THAT THIS EXCLUSION IS NOT LEGALLY ENFORCEABLE, THE 
DURATION OF SUCH IMPLIED WARRANTIES SHALL BE LIMITED TO ONE YEAR FROM DATE OF 
PURCHASE. NO SUIT FOR BREACH OF EXPRESS OR IMPLIED WARRANTY MAY BE BROUGHT AFTER 
ONE (1) YEAR FROM DATE OF PURCHASE.  

Subject to the terms and limitations of this Sonetics Standard Limited Warranty, this warranty 
covers any new covered product found to be defective within the applicable warranty period. 
Sonetics reserves the right to examine the alleged defective covered product to determine whether 
this Sonetics Standard Limited Warranty is applicable, and final determination of warranty 
coverage lies solely with Sonetics. If Sonetics determines that warranty coverage applies, Sonetics 
reserves the right to either repair or replace a covered product or any part thereof, as determined 
by Sonetics in its sole discretion. If the product has been subjected to conditions which exclude 
coverage under the warranty, customer will be so advised. Customer may then authorize paid 
repair service or other disposition of the product. Notwithstanding any other provision of this 
warranty, if you sell or otherwise transfer ownership of your covered product, this Sonetics 
Standard Limited Warranty shall automatically terminate. 

 

Summary of Contents for SON150



































Reviews: