18
AC power inlet.
Always operate the unit at the mains voltage the voltage selector is set to
(115VAC or 220-240VAC). Failure to do
so may cause a costly damage to the unit. If that inadvertently happens, immediately pull out the AC plug.
19
Voltage selector. For travelling musicians. Set it according to the local operating mains voltage. If you forget to, and operate a unit set to
115VAC on 220 to 240V, you may easily burn the power transformer. The fuse probably won’t be quick enough to save it. So please pay
attention.
20
(Mk II only). Unbalanced line output.
TECHNICAL SPECIFICATIONS:
1 channel
Frequency response: 10Hz-50kHz +/- 3dB
Maximum gain: 54dB at the line output, 32dB at the DI (mic level) output
Harmonic distortion: <2% before clipping level, quickly decreases if driven less.
Maximum output level: 30dBu
Minimum output load: 600Ω
Connectors: XLR DI and line output, balanced only
Instrument input: 1/4” unbalanced, mono
Amp (Thru): ¼” unbalanced, mono, buffered
Unbalanced out: ¼” mono
Aux in: 1/8” (3.5mm) stereo jack.
Headphones out: 1/8” (3.5mm) stereo jack.
Headphones minimum impedance for +/-10.5V output swing: 150Ω
Power consumption: 15W
Operating voltage: 110-120VAC or 220-240VAC, switchable
WARRANTY INFORMATION
Sonic Farm gives a one-year warranty on parts and labor from the date of purchase.
Should you need to send in your unit for warranty covered service, please contact us for an RMA number first.
We will also tell you where to send the unit.
Any Modification of the unit voids the warranty.
