3-2
2.Bearing mark:
Indicates the bearing scale. It changes after inputting
bow-bearing information from external equipment. (*)
3.Audio mark:
This mark shows the range of audible sound, that is
a signal generated in the region between the
two lines can be detected.
4.Bow line:
This line shows a direction in which the ship
goes.
5.Internal memory number:
This field shows a memory number from which
number, settings being currently used are
loaded.
6.Gain:
This field shows gain specified.
7.Tilt:
This field shows the angle of depression of a
directional transmission /reception beam.
8.Range:
This field shows the range of the sonar
horizontal image.
The range depending on an off-center value.
9.Stroke:
This field indicates the elevation of a hoist.
10.Date & time:
This is the current date and time.
11.Latitude&Longitude:
It shows latitude and longitude of own ship.
The input from external equipment is
necessary. (*)
12.Speed:
It shows own ship speed information. The
input from external equipment is necessary. (*)
13.Heading:
It shows heading information. The input from
external equipment is necessary. (*)
* Remarks : Please contact our service engineer before connecting with an
external equipment.
Summary of Contents for KCS-3500
