Page 10
A
TCP/IP Properties
window appears.
6
Configure TCP/IP Settings
Configure your computer IP address, subnet mask, and gateway IP address. If the Man-
agement station is running Windows 2000, do the following:
Note
: Consult your operating system manuals for specific instructions on configuring
network settings.
1. From the
Start
menu, select
Settings
,
and then
Network and Dial up
Connections
.
2. Right click on the
Local Area
Connection
icon, and select
Properties
.
3. Select
Internet Protocol (TCP/IP)
.
4. Click
Properties
.
5. Select
Specify an IP address
.
6. Enter 192.168.168.200 in the
IP
address
field.
7. Enter 255.255.255.0 in the
Subnet
mask
field.
8. Enter 192.168.168.1 in the
Gateway
field.
9. If there are no server IP addresses listed
in the DNS settings, use the DNS IP
addresses from your ISP.
10. Click
OK
, then
OK
again to close the
Local Area Connection Properties
window.
Set Up Continues
→
Restart your computer if you are running Windows 95, 98, or NT. Windows 2000 does
not require restarting the computer for network settings to take effect.
7
Summary of Contents for GX 250
Page 1: ...SONICWALL Installation Guide...
Page 51: ...Page 50...