Page 8
Check Link LEDs
If
a
Link
LED does not light after connecting a cable, try connecting the ports using the
other cable in the box. For instance, if you used the red
Crossover
cable to connect the
WAN
port to the cable modem, DSL modem, or your Internet router and the
Link
LED
does not light, try connecting the grey
Ethernet
cable to the ports.
The SonicWALL Test LED stays lit when the SonicWALL is powered on initially. It stays lit
while the SonicWALL performs a series of diagnostic tests.
Network Addressing Information
In
order to continue the installation of your SonicWALL, you need to obtain IP
addressing information from your Internet Service Provider (ISP). The information is
required to connect to the Internet.
ISP Contact Information
Telephone Number
, if contact by phone__________________ or e-mail address if you
contact your ISP via e-mail_________________________.
You will use one of the following connection types to connect to the Internet:
Static IP Address
NAT with PPPoE
IP Address________________
User Name:_______________
Subnet Mask______________
Password:_________________
Default Gateway:___________
DNS Address:______________
3
4
WAN Link LED
LAN Link LED
Test LED
NAT with DHCP
Host Name:___________________
MAC Address (SonicWALL Serial
Number):_______________________
Domain Suffix:_________________
Summary of Contents for GX 250
Page 1: ...SONICWALL Installation Guide...
Page 51: ...Page 50...