SonicWALL SSL-VPN 4000 Getting Started Guide Page 41
Scenario B: Allowing DMZ -> LAN Connection in SonicOS Enhanced
When users have connected to the SSL-VPN, they need to be able to connect to
resources on the LAN.
1. In the administration interface, navigate to the
Network > Address Objects
page.
2. At the bottom of the page, below the
Address Objects
table, click
.
3. In the
Add Object
dialog box, create an address object for the X0 interface IP
address of your SonicWALL SSL-VPN 4000:
Click
OK
to create the object.
4. Click
again to create an address object for the NetExtender range.
5. In the
Add Object
dialog box, create an address object for the X0 interface IP
address of your SonicWALL SSL-VPN 4000:
Click
OK
to create the object.
Name
Enter a name for the SonicWALL SSL-VPN 4000
Zone Assignment
DMZ
Type
Host
IP Address
The SonicWALL SSL-VPN 4000’s X0 interface IP address
within your DMZ range, for example,
10.1.1.200
Name
Enter a name for NetExtender
Zone Assignment
DMZ
Type
Range
Starting IP Address
The start of the NetExtender IP address range within your
existing DMZ range, for example,
10.1.1.220
Ending IP Address
The end of the NetExtender IP address range within your
existing DMZ range, for example,
10.1.1.250
