SonicWALL TZ 170 SP Getting Started Guide Page 31
Mounting the SonicWALL TZ 170 SP
Wall Mounting the SonicWALL TZ 170 SP
Follow the instructions below to mount the SonicWALL TZ 170 SP on the wall.
1. Using the mounting plate as a template, mark the places to insert the mounting
anchors.
2. Using a #2 Phillips screw driver, press the tip of the anchor into the marked places on
the hollow wall.
3. Turn the screwdriver clockwise until the anchor is flush with the wall. Repeat for the
second anchor.
4. Insert a #6 x 1
1/4
” pan head Phillips self-tapping screw into each anchor leaving a gap
for the mounting plate.
Summary of Contents for TZ 170 SP
Page 41: ...Page 40 Notes...
