SonicWALL TZ 190 Getting Started Guide Page 5
Recording Configuration Information
Before continuing, record the following configuration information for your reference:
WWAN Connection Information
Registration Information
Networking Information
WWAN Service Provider
:
(Cingular, Verizon, etc.)
Record the name of your WWAN service
provider.
WWAN Plan Type
:
(Standard, Acceleration, VPN, etc.)
Record the type of plan you have with
your WWAN service provider. If you are
not sure what your plan type is, ask your
service provider.
Serial Number
:
(xxxxxxxxxxxx)
Record the serial number found on the
bottom panel of your SonicWALL TZ 190
appliance.
Authentication Code
:
(xxxx-xxxx)
Record the authentication code found on
the bottom panel of your
SonicWALL TZ 190 appliance.
TZ 190 LAN IP Address
:
Select a static IP address for your
SonicWALL TZ 190 appliance that is within
the range of your local subnet.
TZ 190 Subnet Mask
:
Record the subnet mask for the local
subnet where you are installing your
SonicWALL TZ 190 appliance.
Ethernet WAN IP Address
:
(optional)
Select a static IP address for your Ethernet
WAN. This setting only applies if you are
already using an ISP that assigns a static
IP (as in the case of a landline T1/E1
connection, where the WWAN is a
failover).
DNS Server 1 :
(optional)
DNS Server 2 :
(optional)
In most cases, DNS server information is
automatically provided by your WAN
service provider upon connection. Record
your DNS server information here if your
network requires it. If for example, you
make use of internal DNS servers.
