Step sequencer playback and recording
14
This section explains step sequence playback and re-
cording.
Pattern playback
① Press
.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• Press
again to stop playback.
• At the playback position, the step LED will become
lit if unlit or become unlit if lit.
• The page button that corresponds with the current
playback position will light red. Other page buttons
will be lit green or orange.
• During pattern playback, press a page button to
lock the page, lighting it red.
Pressing
(
,
,
or
) will unlock the
page. (Other page buttons will blink in the same
color as when stopped. )
• The page buttons correspond to the steps as fol-
lows.
Pattern 1–16 : lit green
Pattern 17–32 :
lit green
Pattern 33–48 :
lit green
Pattern 49–64 :
lit green
Pattern 65–80 : lit orange
Pattern 81–96 :
lit orange
Pattern 97–112 :
lit orange
Pattern 113–128 :
lit orange
Selecting patterns
① Press
.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The pattern number is shown.
② Press
,
,
, or
to select the pattern range.
(The selected page button will light green/orange.)
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• To select pages 5–8, press
,
,
, or
twice.
(That page button will light orange.)
• The page buttons correspond to the steps as fol-
lows.
Pattern 1–16 : lit green
Pattern 17–32 :
lit green
Pattern 33–48 :
lit green
Pattern 49–64 :
lit green
Pattern 65–80 : lit orange
Pattern 81–96 :
lit orange
Pattern 97–112 :
lit orange
Pattern 113–128 :
lit orange
③ Press a STEP 1–16 button to select a pattern (and
end pattern selection mode).
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The
VALUE
knob can also be turned to select
patterns.
• Selecting the already selected pattern will reload it,
clearing the edited settings.
Selecting multiple patterns and playing
them back in order (chain playback)
① Press
twice (lights orange).
② Press
,
,
, or
to select the pattern range.
(The selected page button will light green/orange.)
③ Press step buttons to select patterns in the order to
be played.
The step LED for the selected pattern lights and the
pattern number is shown on the display.
④ Press
to play patterns in the selected order.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• After the last pattern has played, that pattern will
continue playing in a loop.
Press to end chain playback.
• Press the step button for the selected pattern
again to deselect it.
• STUTTER mode cannot be used during chain play-
back.
Initializing patterns
① While pressing
, press
.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• CLR will appear on the display.
• All note and parameter lock data for the pattern will
be cleared.
