Sequencer
24
• When recording instruments (
lit red), only notes
will be cleared.
• When recording parameters (
lit red), only
parameter data will be cleared.
• Normally, when
and
are lit red, note for
the current instrument and parameter data will be
cleared.
Clearing drum note and parameter data
in pad mode
① Select the drum track and enable pad mode.
② Use
and
to select the step.
③ While pressing and holding
, press the instrument
button of the note you want to clear.
• While pressing
,
buttons for steps that
have parameter lock data blink green. While press-
ing
, press a
button to delete the param-
eter data for that step.
The key lights green when on and orange
when both parameter and sound locking are on. When
neither are on, it is unlit.
When parameter locking is on, parameters will be
changed by recorded parameter lock data.
Clearing parameter locks
① Select the pattern on which to clear parameter
locks. (see "Selecting patterns" on p.15)
② Select the track with parameter locks that you want
to clear. (See "Selecting and playing bass and drum
tracks" on p.8)
③ Press and hold
.
④ Press
.
• When parameter lock data clearing has completed,
CLR will be shown on the display.
• In pad mode, press the
while pressing
,
turn the
VALUE
knob to select P.LCK, and then
press the
to clear parameter locks.
Clearing bass note and parameter data
① Select the bass track.
② While pressing and holding
, press a step to clear
its note and parameter data.
• While pressing the
button, steps that have pa-
rameter lock data blink red.
• When recording notes (
lit red), only notes will be
cleared.
• When recording parameters (
lit red), only
parameter data will be cleared.
• Normally, when
and
are lit red, note and
parameter data will be cleared.
Clearing drum note and parameter data
in select mode
① Select the drum track and enable select mode.
② Select the instrument with notes/parameters that
you want to clear.
③ While pressing and holding
, press a step to clear
its note and parameter data.
• While pressing the
button, steps that have pa-
rameter lock data blink red.
