4. Startup & Login
Obtaining License Codes
The license code must be obtained directly from Sonifex.
You can do this in several ways, either by phone to
Sonifex on +44 (0)1933 650700 during normal UK
working hours; or by sending the form from the front of
the manual by fax to +44 (0)1933 650726 or directly by
post; or by completing the form on the supplied link or
through our website
www.sonifex.co.uk/netlog
; or by
supplying the information indicated on the form by email
to
netlog.support@sonifex.co.uk
. Sonifex will endeavour
to return the license codes as quickly as possible. In the
mean time the machine can be used as a 2-stream license
demo machine for 3 days.
The Login Procedure
To enter the system, all users must specify a User Name
and a Password.
These will then be compared to details which are stored
onboard the Net-Log before the user can access the
system. If the user enters the correct information, they
will be allowed to use the PC interface to control the
designated logger. If the user enters incorrect information,
they will be asked to re-enter the User Name and
Password.
To configure the system, enter a User Name of “admin”
and a Password of “admin”. The password should be
changed once you are running the program.
There is a Net-Log Device List, which allows you to choose
one of any number of Net-Logs connected to the network.
When the software is loaded for the first time, no Net-Logs
are available in the Device List, and a message box
appears stating this. You will be taken automatically to the
Device List editor, where you can add your Net-Log into
the list.
The Device List Editor
To enter a Net-Log into the list you must give it a text
name and the IP Address that was downloaded into the
Net-Log as described in the “Setup & Installation” chapter.
Once you have entered the Name and IP Address into the
boxes, press the “Add” button, and it will now appear in
the list.
The two up/down arrows on the right hand side are used
to select the default Net-Log used when you have multiple
units. The default unit is the one that is automatically
selected when you login.
Multiple Net-Logs can be Added, Deleted and Replaced.
See
Figure 4.4
.
To edit the name or the IP Address of a device, select the
unit in the list and edit its details that appear in the Name
and IP Address text boxes. When you have finished, click
the “Replace” button.
To delete a device contained in the list, select the unit,
and then press “Delete”. Once you have finished entering
the details of your Net-Log(s) into the device list press
“OK”. This will return you to the Login screen.
Note: Prior to logging on to a new Net-Log for the first
time, ensure that the clock on the PC is set correctly as
this time will be used to update Net-Logs’ onboard clock.
The software will attempt to connect to the Net-Log and
when a connection has been established you will see the
main screen.
Figure 4.3 The Login Screen
Figure 4.4 The Net-Log Device List Editor
Sonifex Net-Log User Handbook
20
Summary of Contents for Net-Log
