9. Serial Control Interface
S
ERIAL
C
ONTROL
I
NTERFACE
9
Figure 9.1 Control Options Screen
Figure 9.2 Televic CE2500 Interface Options
The Serial Control Interface allows external equipment to
remotely control several functions of the Net-Log. Each of
the available interface protocols have been designed
according to customers’ specific requirements. Additional
interface options may be added in the future; please
contact Sonifex Ltd for further details.
To enable the Serial Control Interface, enter the Options
screen and select the “Control” tab (
Figure 9.1
). From
the drop down list, select the required Control Interface
type. If the drop down list is disabled, this means the
firmware in the connected Net-Log has not got the Serial
Control Interface enabled, or a later version of firmware is
required.
The Interface types currently available are:
Televic CE2500
AMX/Crestron
When a Control Interface type is selected from the list, the
available settings for that type will then be displayed.
Televic CE2500 Interface
The Televic CE2500 is the central control unit of Televic’s
Digital Conference and Interpretation System. This
interface provides automatic record start when the
Conference Systems’ microphones are activated. The
recording is then stopped when the microphone is
deactivated. The Net-Log also extracts the microphone
number and the name of the speaker from the microphone
activation command and stores this information on the
internal hard disk along with the normal cut information.
This additional data is then displayed in the Play screens
cut list. The Net-Log can currently support up to 128
microphones.
The settings relating to this interface allow the available
record channels to be associated with specific microphone
numbers. Each channel is displayed according to the
Record option settings. In
Figure 9.2
, Audio Input 1 is
configured as stereo and Audio Input 2 is configured as
dual mono. Each available channel is identified by the
service name also given in the Record options.
Each channel can be configured in one of three modes:
Note: Only one microphone number and name can be
stored per recording, so the last one used is stored.
Disabled
When this option is selected, the channel will not be
controlled by any of the microphones on the Conference
System.
Sonifex Net-Log User Handbook
25
Summary of Contents for Net-Log
