23
Matching Converters - RB-PLI6 9
9 RB-PLI6 6 Way Mono Passive Line Isolation Unit
Introduction
Fig 9-1: RB-PLI6 Front Panel
The RB-PLI6 6 way mono passive line isolation unit is used to isolate audio
signals from inter area ground hum loops, which could be caused by
equipment being powered by different mains power supplies or phases on
the same supply.
The input and output are connected together through a transformer and
the unit has internal jumpers allowing the inputs and/or outputs to be
balanced about ground. The unit requires no mains power for operation.
This unit is useful where audio is required to be driven over a relatively
long length of cable. By isolating the signal using transformers, ground
loop currents that can be present in non-isolated signals, are eradicated
completely.
Ground Balancing
Input
Output
X6
System Block Diagram
Fig 9-2: RB-PLI6 System Block Diagram