Redbox Embedder/De-embedder User Handbook
29
4
R B - V H C M A 4
RB-VHCMA
4
De-Embed
The BANK CHANNEL button and its indicators are only used when the unit is operating in
Channel mode and are used to select the audio output bank channel when controlling the
de-embedding channel routing. The button LED is used to show whether the channel is
enabled. To enable or disable the channel, press and hold the BANK CHANNEL button for
two seconds until the channel number indicator blinks. When lit green it is enabled and
when it is lit red it is disabled. When the channel is disabled, the audio output is muted.
The channel will also be muted if the bank is disabled, even if the channel is enabled.
Group
Embed
The GROUP button and its indicators are used to select the group number with which to
embed the analogue input channels to. The button LED is used show whether embedding
is enabled to the currently selected group. To enable or disable the embedding to a group,
press and hold the GROUP button for two seconds until the group number indicator blinks.
When lit green it is enabled and when it is lit red it is disabled. When the group is disabled,
no embedding is done to that group number.
De-Embed
The GROUP button and its indicators are used to select the group audio number within the
video signal to de-embed and send to analogue outputs in the currently selected bank.
Group Channel
Embed
The GROUP CHANNEL and its indicators are used to select the channel within the currently
selected group with which to embed the analogue input channel to. This button is only
used when operating in Channel mode. The button LED is used show whether the channel
is enabled for embedding. To enable or disable the channel, press and hold the GROUP
CHANNEL button for two seconds until the channel number indicator blinks. When lit
green it is enabled and when it is lit red it is disabled. When the channel is disabled, no
audio is embedded to that channel. The channel will also not be embedded if the group is
not enabled for embedding, even if the channel is enabled.
De-Embed
The GROUP CHANNEL button and its indicators are used to select the channel number
within the currently selected group to de-embed and send to the analogue output in the
currently selected bank and bank channel. This button is only used when operating in
Channel mode.
Status
This button is used to select the output number when controlling the embedding routing.
It is also used to enter and exit the group deletion mode.
