Redbox Embedder/De-embedder User Handbook
47
5
RB-VHCMD
1
6
R B - V H C M D 1 6
RS232 Remote Control
A 9-way female D-type connector carries a standard RS232 interface via which advanced
configuration options may be set and many functions may be remotely controlled. The pin
assignations are as follows:
Pin No.
Function
1
Unused
6
Unused
2
Data transmit (TX)
7
Unused
3
Data receive (RX)
8
Unused
4
Unused
9
Unused
5
Ground
The RB-VHCMD16 will interface directly with personal computer serial ports at standard
RS232 signal levels using a straight-through cable. The default format is 19200 baud with 8
data bits, even parity and 1 stop bit. Sonifex SCi software, when installed on a suitable PC,
provides straightforward graphical access to all remote control and configuration options
via both RS232 and Ethernet interfaces. Alternatively, commands may be issued from any
text-based terminal program (e.g. Hyperterminal) or custom software may be developed
for specific requirements.
Ethernet
The Ethernet port is connected using a standard RJ-45 connector on the rear of the panel.
It is a 10/100Mbps link. The unit is shipped with DHCP enabled to allow the unit to be
plug and play if the users local area network has a DHCP server. If one is not available on
