5
6
Using the Speaker
Bluetooth
pairing operation
2. Turn on the Bluetooth feature on your phone/music device.
3. Turn on the system, when the indicator light flashes blue, it is in
pairing mode.
4. Do a Bluetooth search with your phone or music device. Then the
phone/music device will search for the speaker system.
5. Select
Mb206
from the list of found devices.
6. Select
OK
or
Yes
to pair the two devices. For some devices, you
may need to put in the 0000 as password to pair them.
7. When they are paired successfully, you will hear a signal, and the
Bluetooth indicator will flash blue.
Note: The system will memorize the last paired device in Bluetooth.
If you turn off or power off the Bluetooth function of the device and
the unit and then turn on, the system will automatically reconnect
with your device/phone if it’s in Bluetooth search range.
Using the Speaker
Receive a call
When a call is coming while paired with a phone via Bluetooth, the
music will stop playing automatically.
You can transfer the call from the speaker system to your phone, or
you can power off the speaker if you do not want conversation
broadcast over the speaker.
Once the call has ended, it depends entirely on your mobile phone
whether the current track will return to playback or not.
Operations when there is a phone call
1. Pick up a call: Press the
PHONE
button to pick up a call.
2. When you are talking through the speaker, press the
VOL+/VOL-
button to adjust the volume.
3. If you do not want to talk by the speaker system, press and hold
the button to disconnect Bluetooth with the phone.
4. Hang up a call: Press the
PHONE
button to hang up a call.
Important notes
1. The unit can only be connected and play contents from one
device at a time.
2. To connect to a different device, you must turn off the Bluetooth
function on your phone device, or un-pair from the current paired
device, then manually pair the device with the speaker system.
3. Some devices, such as an iPhone, may connect immediately in
pairing, some may take as long as 60 seconds to connect, this
is not a malfunction.
To listen to music via a wireless connection, you need to pair the
speaker system with a Bluetooth phone/music
device
.
1. Turn off any Bluetooth devices(phone/music device) previously
paired with your phone or music device.
You can control the playback by the phone device or buttons on the
front panel. System volume can be adjusted by pressing and holding
VOL-/VOL+ button.
Playback operation
To disconnect the device
a) Turn off the Bluetooth function on the phone/music device.
b) Press and hold the button to disconnect the Bluetooth. In this
status, you have to manually pair the devices again. You can
follow the steps 2-6 of
PAIRING OPERATION.
