19810016 REV C
Standard and iCLASS Enhanced Keypad
Page 7
3.4 Remote Partition
Use this selection to check or change the current status of any Partition (User permissions may limit
the Partition selections available).
1. Press SELECT. Keypad Displays: READ IN BADGE OR KEY IN CODE FOR SYSTEM MENUS.
2. Present a valid card or key in your access code and press ENTER.
3. Use the navigation buttons to choose REMOTE PARTITION and press ENTER.
SYSTEM MENUS
TURN CHIME ON
▲
>REMOTE PARTITION
TOGGLE AN OUTPUT
4. Use the navigation buttons to view the current status of each Partition.
5. To change the current security level status of a specific Partition, select the Partition to be
changed and press ENTER.
>REMOTE PARTITION
>A :Dis
B :Disc
▼
Note: Keypad will return to the default screen after 10 seconds of inactivity.
A small “c” following the armstate indicator for each partition (any armstate) indicates chime is
enabled for that partition.
6. After selecting the partition where the keypad is located, choose an arming status:
•
DISARMED
– Keypad will now show DISARMED.
•
OCCUPIED-INSTANT
– Keypad will now show PLEASE WAIT WHILE ARMING.
•
OCCUPIED-DELAYED
– Keypad will now show PLEASE WAIT WHILE ARMING.
•
ARMED
– Keypad will now show PLEASE WAIT WHILE ARMING.
Note: If the selected partition is remote, the system will return you to the Remote Partitions screen
after the PLEASE WAIT WHILE ARMING message with the partition status updated.
Note: The new arm state will then be displayed unless there are violations. If there are violations,
see section “Problems Arming Your System”. If there were no violations, a countdown will begin and
the Keypad will display XXX SEC TO EXIT, if OCCUPIED - DELAYED or ARMED was selected.
3.5 Toggle An Output
Toggle an output gives a user the ability to turn an already programmed Auxiliary Output ON and
OFF. The purpose of Toggle an Output is to allow “Master” level users to toggle Aux Output ON
(apply power) and OFF (remove power) to ensure that whatever device that is wired to that Aux
Output is being powered and functioning as expected.
