MP5 Plus Writer Easy Guide
SONIX TECHNOLOGY CO., LTD.
Page 13
Version 1.0
L
Set Rolling Code parameters; (Note: Only the Rolling Code is enable; )
M
Query pin assignment, programming pin, transition board;
N
Auxiliary function selection region, include:
Check checksum in offline mode, Encrypt the SN8/Hex file, Language setting,
Default mode setting in off-line mode, User Manual, and so on;
O
USB connection status(Green: connecting; Red: unconnected);
P
One key download SN8;
Q
Software version;
Table3-1 MP5 Plus Writer Interface description
Click “Device/Load”
,
select the MCU series, type and programming file in the pop-up window; (For example
SN8P2501B); as shown in Fig3-2,3-3:
Fig3-2 Select MCU series and type
Fig3-3 Select the programming file
After selecting the programming file, MP5 Plus Writer will update the Firmware and download the
programming file automatically; as shown in Fig3-4,3-5: