MP5 Plus Writer Easy Guide
SONIX TECHNOLOGY CO., LTD.
Page 19
Version 1.0
3.2 Programming quantity statistics
In online mode, "Auto Program" and "Program" will count the number of successful and failed operations.
Fig3-15 shows the number of successes and failures after programming.
Execute "
", the number of successes and failures can be cleared to zero.
Fig3-15 The counter in online mode
3.3 Rolling Code Setting
The window of setting parameters pops-up after loading the programming file with Rolling Code.
This window allows you to reset the Rolling Code initial value, the step value, and whether Rolling Code is
validated in Verify mode. As shown in Fig3-16:
Fig3-16 Set Rolling Code parameters
The description of checkbox is as follows:
If checked, Rolling Code is not checked in verify mode.
If not checked, Rolling Code is checked in verify mode.
When the Rolling Code parameter is set successfully, the "Rolling Code" button will be clickable.
This button allows you to reset the parameters of Rolling Code. As is shown in Fig3-17: