4 Maintenance
36
EN
3 Maintenance
1. Snap the two parts of base together.
2. Attach the tower fan on the base and secure with 6 screws.
•
Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive
products.
•
Do not immerse any part of the fan in water or other liquid: if this should
happen, do not put your hand in the liquid, but fi rst remove the plug from the
socket. Carefully dry the appliance and make sure that all the electrical parts
are dry: in the case of doubt, ask for professionally qualifi ed help.
•
It is essential that the motor‘s air holes be kept from dust and lint.
•
If the fan will not be used for long periods, it must be protected from dust and
humidity; we recommend storing it in its original packaging.
