EN
42
07 - OPERATION
Activate display
Press the ON/OFF button on the control panel. The heater goes into anti-freeze mode, the LCD screen
shows 7.0°C and .
Select mode
When the heater is in operating mode, press the „MODE“ button to select different operating modes. There are 6
operating modes:
Comfort mode:
The user can set the comfort temperature by pressing „+“ and „-“ on the keypad; after
selecting the temperature for your comfort mode, stop pressing and wait for 5 seconds, the „°C“ on the
screen will flash 5 times, the temperature is set. Press „+“ or „-“ for more than 1 second to set the tem-
perature quickly. The temperature range is 5°C ~ 35°C.
Comfort mode minus 1°C:
The user cannot adjust the temperature. The heater lowers the temperature by
1°C from the comfort temperature set in comfort mode. For example, if you set 19°C as the comfort
temperature, the temperature in comfort mode minus 1°C, is 18°C.
Comfort mode minus 2°C:
The user cannot set the temperature. The heater lowers the temperature by 2°C
from the comfort temperature set in comfort mode. For example, if you have set 19°C as the comfort
temperature, the temperature in comfort mode minus 2°C is 17°C.
ECO mode:
The user cannot adjust the temperature. The heater lowers the temperature by 3.5°C from
the comfort temperature set in comfort mode. For example, if you have set 19°C as the comfort tempe-
rature, the temperature in ECO mode is - 3.5°C, i.e. 15.5°C.
Anti-Frost Mode:
The temperature is 7°C, user cannot adjust the temperature.
Programme mode:
User can set the working mode in the current time and in the future for one week.
Open window:
If the heater detects that the room temperature drops by 4°C within 30 minutes, the heater
works in anti-frost mode.
Keypad Lock Function:
The keypad can be locked to prevent tampering by pressing and holding down the
„Mode“ and „P“ keys for 3 secongd. This function can be reversed by repeating the above process.
Commissioning
To insert the heater, proceed as follows:
- Plug the mains cable into the power circuit.
- Press the button on the unit to „I“. After 3 flashes, the standby mode starts.
- Then operate the unit according to the following description.
Preinstalled programme
P1
From 0 to 6: Eco mode
From 6 to 9: Comfort mode
From 9 to 17: Eco mode
From 17 to 23: Comfort mode
From 23 to 6: Eco mode
P2
From 0 to 6: Eco mode
From 6 to 9: Comfort mode
From 9 to 12: Eco mode
From 12 to 13:30: Comfort mode
From 13:30 to 17: Eco mode
From 17 to 23: Comfort mode
From 23 to 6: Eco mode
Summary of Contents for 20220302
