33
7 Maintenance and cleaning
Warning! For general maintenance and care, observe the general safety conditions. To ensure
trouble-free operation of the heater, the unit must be cleaned regularly. Include the following
procedure:
1.
Turn off the heating.
2. Then pull the power cord out of the socket.
3. Remove dust from a cloth or a vacuum cleaner.
4. Clean the outside with a damp cloth. To clean the plastic parts do not use gasoline, solvents
or abrasive agents that can damage the plastic surface.
5. Insert the power cord into the socket.
6. Turn on the device.
EN
MODEL: OFR 7 LCD
Item
Symbol
Value
Unit
HEAT OUTPUT
Nominal heat output
P
nom
1.5
kW
Minimum heat output (indicative)
P
min
0.6
kW
Maximum continuous heat output
P
max,c
1.5
kW
AUXILIARY ELECTRICITY CONSUMPTION
At nominal heat output
el
max
N.A.
kW
At minimum heat output
el
min
N.A.
kW
In standby mode
el
SB
0
kW
Item
Unit
Type of heat input, for electric storage local space heaters only (select one)
manual heat charge control, with integrated thermostat
[no]
manual heat charge control with room and/or outdoor temperature feedback
[no]
electronic heat charge control with room and/or outdoor temperature feedback
[no]
fan assisted heat output
[no]
Type of heat output/room temperature control (select one)
single stage heat output and no room temperature control
[no]
Two or more manual stages, no room temperature control
[no]
with mechanic thermostat room temperature control
[no]
with electronic room temperature control
[yes]
electronic room temperature control plus day timer
[no]
electronic room temperature control plus week timer
[no]
