Quick Start Guide for Allegro FW400
Compatibility
At this printing, the Allegro FW400 may be used with any Mac
®
or Windows
OS computer with an available PCI slot that meets the following requirements:
•
Macintosh Computer Requirements:
Power Macintosh
®
or Macintosh clone computer running Mac OS 9.0
®
through Mac OS X Version 10.3.x.
•
PC Requirements:
IBM PC/AT or compatible desktop computer with Pentium
®
II (o
®
equivalent) or better running Windows 98 SE (Second Edition),
Windows Me (Millennium Edition), Windows 2000, or Window
You Should Have
The following item should be included in your product package:
• One Allegro FW400 FireWire PCI Adapter Card
The following item may be required for installation:
• Medium Phillips screwdriver
You may need the following item to connect peripherals to the Al
• One or more FireWire (IEEE 1394) cables (sold separately)
System Requirements
The Allegro FW400 requires the following in order to operate in your system:
• One available PCI slot
• FireWire driver software*
* Depending on your operating system, you may need to install drivers; instructions follow.
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com
Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350
©2003 Sonnet Technologies, All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Allegro are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks of Apple Computer,
Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA. QS-AFW400-E-120903
Support Note:
We recommend you make a backup of important infor-
mation on your system’s current hard drive(s) prior to installing new
hardware or software.
When handling computer products, you must take care to prevent components
from being damaged by static electricity. Before opening your computer or
removing parts from their packages, always ground yourself first by touching
a metal part of the computer, such as a port access cover, and work in an area
free of static electricity; avoid carpeted areas. Handle all electronic components
by their edges, and avoid touching connector traces and component pins.
