background image

Quick Start Guide for Crescendo/PB G3

Macintosh PowerBook and Operating System Compatibility

The Crescendo/PB G3 processor upgrade card is compatible with any Macintosh
PowerBook 1400 series model.

At this printing, the Crescendo/PB G3 processor upgrade is compatible with
System 7.5.3 through Mac

®

OS 9.1. For up-to-date Mac OS compatibility informa-

tion, check our web site. 

You Should Have

The following items should be included in your product package:

• Crescendo/PB G3 processor upgrade card

• Crescendo/Encore Install Diskette

• Sonnet Installer CD

• 

Powered by Sonnet

label

• Small Phillips screwdriver/hex head driver tool

Software updates and links are available from the Sonnet web site at www.sonnettech.com.

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Sonnet Technologies Customer Service hours are Mon.–Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com

Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350

©1999 Sonnet Technologies, Inc. Revised 2002. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Encore and Crescendo are trademarks of Sonnet Technologies, Inc. Macintosh and Mac
are trademarks of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of  their respective owners. Product specifications subject to change without notice.
Printed in the USA. CG3PB-QS-E-042902

Support Note:

Please familiarize yourself with the following instructions

before beginning the installation. If you feel you are unable to install the 

computer hardware, please contact a qualified computer technician.

Before proceeding with the installation, we recommend that you make a backup
of important information on your hard drive prior to installing new hardware or
software.

CRESCENDO

/

PB G

3

  

Processor Upgrade Card for Macintosh

®

 PowerBook

®

 1400 Series Computers

Summary of Contents for Crescendo PB G3







Reviews: