9
Chapter 4 – Complete Setup and Configuration
SETUP AND CONFIGURATION STEPS—WINDOWS USERS
A – Confirm the Echo Express SE III and Installed
Cards Are Recognized
1.
With the Echo chassis connected to a power source and
to the computer, turn on the computer. Note that if there
are any other Thunderbolt devices connected between
the Sonnet adapter and your computer, they must also be
powered for you to perform the following steps.
2.
When the computer boots for the first time after you
connected the Echo Express SE III, an Approve New
Thunderbolt™ Devices window appears. From the drop-down
menu select Always Connect, and then click OK.
3.
Right-click the Windows Start button, and then select
Manage; the Computer Management window appears.
4.
In the Computer Management window, click the category of
each card type you installed to expand the listing; a generic
adapter listing will appear. After their drivers are installed, the
listings will change to display the names of the installed cards.
B – Install Card Drivers, If Necessary
1.
Launch a web browser, and then go to your card
manufacturer’s website. Download and install the latest
drivers according to the manufacturer’s directions.
2.
Restart your computer; your Echo chassis is ready to use!