is a trade mark of Roon labs
Operating
On/Standby switch
When connected to mains by default the Hermes will go into standby mode. In standby mode the red led on the front panel will lit.
Remark: The Hermes is not visible in your local network or by the Roon server when switched to standby!
Starting up procedure
When the Hermes is switched to “
On
” the display will show you “
Initializing
” This indication means that the system is booting and is
trying to make contact with the network .
The next indication is “
Network Active
” By default the Hermes is getting an IP address based on DHCP. As mentioned above during
the very first time it can take a long time before the Hermes is operational as it is looking for updates and should never switched Off.
The latest indication of the boot process is “
System ready
” It tells you that the system can be used now as a Roon endpoint.
