Quick Start Guide for Presto 10GbE 10GBASE-T
Ports and Indicators Information (Card Version 1)
1 – RJ45 (10GBASE-T) Ports
Connect CAT 6 or CAT 6A cables between these ports and
the switch’s or device’s RJ45 ports.
2 –
Link Speed Indicators
When a link is established between the Presto card and the
switch, these LEDs light to indicate the link speed to the
switch: yellow = 10Gb, green = 1Gb, off = 100Mb.
3 –
Link/Activity Indicators
These LEDs light up green to indicate a link is established
between the Presto card and the switch, and flash green
when there is activity between the two.
Ports and Indicators Information (Card Version 2)
1 – RJ45 (10GBASE-T) Ports
Connect CAT 6 or CAT 6A cables between these ports and
the switch’s or device’s RJ45 ports.
2 –
Link Speed Indicators
When a link is established between the Presto card and the
switch, these LEDs light to indicate the link speed to the
switch: green = 10Gb, yellow = 1Gb, off = 100Mb.
3 –
Link/Activity Indicators
These LEDs light up green to indicate a link is established
between the Presto card and the switch, and flash green
when there is activity between the two.
4
