Quick Start Guide for Tempo HD (Windows Version)
3
Windows 2000 Driver Installation
This section describes the installation of drivers to support the Tempo HD in
systems running Windows 2000. If your system is running Windows 98SE or
Windows Me, go back to “Windows 98SE and Windows Me Driver Installation”
on page 2. If your system is running Windows XP, skip to “Windows XP Driver
Installation” below.
1.
Turn on your computer; during Windows startup, the
New Hardware Found
window will briefly appear, with Mass Storage Device listed as the new hard-
ware type.
2.
When the
Found New Hardware Wizard
window appears, click Next.
3.
When the
Install Hardware Device Drivers
window appears, select “Search for a
suitable driver for my device (recommended),” and then click Next.
4.
When the
Locate Driver Files
window appears, insert the Tempo HD Windows
Driver diskette into your floppy drive.
5.
Select Floppy disk drives under
Optional search locations
and then click Next; a
new window will appear.
6.
Type
A:\Win2000
, and then click OK.
7.
When the
Driver Files Search Results
window appears, click Next.
8.
When the
Digital Signature Not Found
window appears, click Yes; the appro-
priate driver will be installed.
9.
When the
Completing the Found New Hardware Wizard
window appears, click
Finish; you must now format the attached drive. Skip to “Drive Formatting—
Windows 2000 and Windows XP” on page 7.
Windows XP Driver Installation
This section describes the installation of drivers to support the Tempo HD in
systems running Windows XP. If your system is running Windows 98SE or
Windows Me, go back to “Windows 98SE and Windows Me Driver Installation”
on page 2. If your system is running Windows 2000, go back to “Windows 2000
Driver Installation” above.
1.
Turn on your computer; during Windows startup, a
New Hardware Found
pop-up will briefly appear, with Mass Storage Device listed as the new hard-
ware type.
2.
When the
Found New Hardware Wizard
window appears, insert the Tempo
HD Driver diskette into your floppy drive. Select “Install from a specific loca-
tion (Advanced),” and then click Next.
3.
When the next window appears asking you to choose your search and instal-
lation options, select “Search for the best drivers in these locations,” and
“Search removable media (floppy, CD-ROM…,” and then click Next.
4.
When the next window appears, select “WinXP Promise…,” and then click
Next.
Summary of Contents for TEMPO HD
Page 2: ......
