Parker Motor Maintenance Manual
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
© 2021 SONNY’S The CarWash Factory
®
. All Rights Reserved.
SonnysDirect.com
This document is confidential and proprietary to SONNY’S and cannot be used, disclosed, or published without prior written consent.
Content, prices, and availability subject to change without notice.
Manual-M, Parker Motor Maintenance
– Part # 10014125-B
Page 9 of 14
IMPORTANT: FOR THE FIRST MONTH OF OPERATION CHECK ALL HARDWARE AND
FITTINGS FOR TIGHTNESS EACH WEEK!
Preventative Maintenance for Parker Motor Setup
1.
The gear oil in the HECO gearbox should be cleaned after the first 50 hours of operation, 100
hours, and every 1,000 hours thereafter.
2.
Oil should be drained while the unit is at operating temperature. The unit should be cleaned with
flushing oil (use of solvents should be avoided).
WARNING: If the maximum oil operating temperature is exceeded, change the oil
immediately.
WARNING: DO NOT connect a case drain to the HECO motor to avoid mixing hydraulic
fluid and gear oil.
DAILY
1. Before Opening:
a. Check for leaks around hoses and fittings
b. Repair any hydraulic leaks immediately
2. General Examination of Operation:
a. Listen for any unusual noises
b. Observe the operation of the conveyor and power pack
ANNUALLY
1.
Drain, flush, and refill the hydraulic power pack with new, non-foaming, non-detergent hydraulic
fluid (ISO #46).
MAINTENANCE