56
a DHCP server and/or is not
assigned an IP
Set an IP address at the device or activate
the DHCP server.
activated on the network
Set the respective devices or programs in
such a way that access is possible. Your
elements W communicates through the
UDP and TCP ports 80, 554, 1755, 5000,
6000 and 7070.
No WLAN
connection is
established
No WLAN is available
Check the availability of your WLAN net-
work – restart it if necessary.
WLAN out of reach
Reduce the distance to the station or
increase the transmission output.
The key was entered incor-
rectly or is too short
Reenter the key as described.
The device is set to “LAN
only”.
Set the device to “AUTO”.
No LAN connec-
tion is established
The network connector is
not plugged in
Plug the network connector into the LAN
socket of the device.
The device is set to “WLAN
only”
Set the device to “AUTO”.
The network cable is defec-
tive
Replace the network cable and try again.
The desired stati-
on was not found
The currently set station is
not currently transmitting
Select another station to play back.
The station’s max. amount
of permissible receivers was
exceeded
Select another station to play back.
The link is no longer correct
/ the station no longer
transmits
Ask your provider whether this station is
still available.
Data transmission of the In-
ternet connection is too low
Check your network and contact your
provider if necessary.
Remote control
doesn’t work or
The distance is too large
Reduce the distance between the remote
control and the device.
The battery is empty
Replace the batteries of the remote
control.
The iRadio no
longer responds
to input
Summary of Contents for elements W AU4101BL
Page 1: ...Instruction Manual...
