Chapter 9: The Sonos® Controller 100
9-33
Sleep Timer Undocked
Use this setting to select the amount of time after which your Controller
enters
light sleep
mode when not connected to a power supply. The screen
will turn off until motion is detected or a button is pressed.
Sleep Timer Docked
Use this setting to select the amount of time after which your Controller
enters
light sleep
mode when plugged into the adapter or sitting in the
cradle. Because the Controller is connected to a power supply during this
time, you can set this sleep timer significantly higher than the undocked
sleep timer setting.
Screen Brightness
Use this setting to adjust the brightness of the screen display.
Button Brightness
Use this setting to adjust the backlighting of the buttons that occurs when
the light sensor automatically lights the buttons based upon the lighting
conditions of the environment.
Advanced Settings
The
Advanced Settings
menu provides you with some additional menu choices:
•
Deep Sleep Timer
. Use this setting to set the deep sleep timer for your
Controller. Your Controller will go into
deep sleep
to preserve the battery life
when it is unused for this specified period of time. When your Controller wakes
from deep sleep - either from the movement sensor or from a button touch - it
will go through a restart cycle which takes several seconds.
•
Motion Sensor
.
The motion sensor automatically
wakes
your Controller when
motion is detected
.
Use this setting to turn the motion sensor ‘on’, ‘off’, or ‘off
while charging’, which will disable the motion sensor only when your Control-
ler is seated in the cradle or connected to the power adapter.
•
Language
. Use this setting to select your language preference. When you
change your language preference, the Controller restarts.
•
Turn Off Controller
. Use this setting to put your Controller into
deep sleep
anytime it will not be in use for an extended period of time, or when you are
