EN
| 41
8. Operation
Event
Start ultrasonic cleaning
(Boost mode)
Stop ultrasonic cleaning
before expiry
Program settings
Trigger
Set rotary switch for cleaning time to desired time
value
AND
Press Degas / Boost button briefly until the mode is
reached
AND
START / STOP button is pressed briefly
OR
if ultrasound is already on, the Boost mode can also be
changed to (or exited again) during running ultrasound
operation by pressing the Degas / Boost button
START / STOP button is pressed briefly
OR
Press on / off button briefly
Preselect machine parameters time and temperature,
boost / degas if necessary.
Then press and hold (2 seconds) the "Start / Stop
button"
Timer set to 0 minutes and
press and hold (2 seconds) "
PRE
SET
"
Response
Ultrasound in operation for the set time in Degas mode
Machine LED: lights continuously
Start / Stop Ultrasound LED: lights
Degas / Boost LED: lights
Time LED bar: SETPOINT time lights
Time LED bar: remaining running time flashes
Ultrasound off, ultrasound LED off
(machine completely off if machine button is pressed)
Ultrasound starts for approx. 1 second
Programming. LED flashes briefly once
Ultrasound switches off again
No reaction of the machine
SONOSWISS_GebrauchsanleitungD-E-FR-IT-ES_ARIAL_P.indd 41
16.10.18 08:02
