background image

40

41

With the CE symbol, Sonova AG confirms that  
this product – including accessories – meets the 
requirements of the Medical Devices Directive 
93/42/EEC as well as the Radio Equipment 
Directive 2014/53/EU. The numbers after the  
CE symbol correspond to the code of certified 
institutions that were consulted under the 
above-mentioned directives.

This symbol indicates that the products  
described in these user instructions adhere to  
the requirements for an applied part of Type B  
of EN 60601-1. The surface of the hearing device  
is specified as an applied part of Type B.

Indicates the medical device manufacturer, as 
defined in EU Directive 93/42/EEC.

17. Information and description  

of symbols

This symbol indicates that it is important for  
the user to read and take into account the 
relevant information in these user guides.

This symbol indicates that it is important for  
the user to pay attention to the relevant warning 
notices in these user guides.

Important information for handling and  
product safety.

This symbol confers that the electromagnetic 
interference from the device is under limits 
approved by the US Federal Communications 
Commission.

The Bluetooth® word mark and logos are 
registered trademarks owned by Bluetooth SIG, 
Inc. and any use of such marks by Sonova AG is 
under license. Other trademarks and trade  
names are those of their respective owners.

Summary of Contents for PHONAK Roger Focus II


































Reviews: