10
11
3. Preparing the charger
a) Plug the larger end of the charging cable into the
power supply.
b) Plug the smaller end into the USB port on the charger.
c) Plug the power supply into a power outlet.
d) The indicator light is green when the charger
is connected to the power supply.
Connecting the power supply
a
b
d
c
Power supply specification
Power supply output voltage
5 VDC +/-10%, current 1 A
Charger input voltage
5 VDC +/-10%, current 1 A
USB cable specifications
5 V min. 1 A, USB-A to USB-C,
maximum length 3 m
4. Charging the hearing device
Low power: You will hear two beeps when the battery
is low. You will have approximately 60 minutes before
you have to charge the hearing device.
The hearing device must be dry before charging, see
chapter 13.
