Working Instruction
,
Electrical
3.2.1 External
Antenna
Connector
This is the instruction how to replace the External Antenna Connector:
Step-by-Step Instructions
1
Use BGA Repair Equipment to replace the
Antenna Connector, which is located accordig to
the arrow.
3.2.2
30 PIN BTB Female Connector, behind the System Connector
This is the instruction how to replace the 30 PIN BTB Female Connector:
Step-by-Step Instructions
1
NOTE!
The 30 PIN BTB Female Connector is located
behind the System Connector, according to the
arrow (1).
Remove the System Connector.
NOTE!
The Light Gasket is located according to the
arrow (2).
Be careful not to damage other components.
Use a dentist hook to remove the Light Gasket.
Clean the surface with Isopropyl alcohol.
Use BGA Repair Equipment to replace the
Antenna 30 PIN BTB Female Connector to the
right position, according to the arrow (3).
Apply a new Sealing Gasket.
3
2
1
3/000 21-2/FEA 209544/88 C
Company Internal
Sony Ericsson Mobile Communications AB
8(13)
