C905
1222-9526 rev. 1
APPENDIX
A
P
P
E
NDIX
When the Display or Navigation
Keyboard is in use then use the PBA
Key Flex Flip, Display and Slider FPC
Assy, mounted according to pictures
13 and 14.
Picture 13
Picture 14
Connect the Slider FPC Assy to the
PBA, according to picture 15.
Picture 15
Place the PBA Key Flex Flip and
Display by using the Guide Pin inside
the Display holder, according to
picture 16.
Picture 16
Close the Bottom part of the TRS
Fixture, according to pictures 17 and
18.
Picture 17
Picture 18
Check that the Ear Speaker is
connected properly to the PBA Key
Flex Flip, see picture 19.
Picture 19
Connect Power Supply Channel 1
(VBATT) Black and Red Lab Plugs to
the TRS Fixture according to picture 20.
Picture 20
Connect the Power Supply Channel 2
Cable (DCIO/SEPI), according to
picture 21.
Picture 21
Secure the DCIO/SEPI Cable by using
the locking screw, according to
picture 22.
Picture 22
Connect SMK RF Probe to the X1200
RF Switch if needed, according to
picture 23.
Picture 23
Secure the SMK RF Probe with the RF
Probe locking device, according to
picture 24.
Picture 24
Troubleshooting Fixture Setup Instructions
SEMC Troubleshooting Manual
123
(124)