White Paper
J200
35
November 2004
Support of GPRS/CS com-
bined procedures
Yes
Network control mode
NC0
Support of access in 2
phases
Yes
Support of PRACH on 11
bits
Yes
Support of GPRS re-selec-
tion C31/C32
Yes
Support of static and
dynamic addressing
Yes
Support of power control
Uplink and Downlink
Uplink = yes, Downlink is a network feature
Support of ciphering algo-
rithms
GEA1
Support of compression
algorithms
No
Support of the QoS modifi-
cation procedure
Yes, when initiated by the network
(not by the handset)
Interfaces to external
devices supported by the
phone
IrDA, Datarate = SIR & MIR, max
115.2 kbps
Downlink data rate
Up to 85,600 bps for packet data communication, using 4 time slots in cod-
ing scheme CS-4
Uplink data rate
Up to 21,400 bps for packet data communication, using 1 time slot in coding
scheme CS-4
Mode of operation
Class B and Class C modes of operation supported. It is possible for the
user to choose if the Circuit Switched services should be favoured.
R Reference point
Physical layer: PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
IP connectivity
PDP type IP is supported
IP termination in mobile
Application
WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS
QoS negotiation supported. Default requested QoS sent by the handset at
PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence
Class: subscribed.
Precedence class supported (1,2,3)
Reliability class 1-5 supported
Delay classes supported (1,2,3,4)
Mean and peak throughput rate limited by multi slot class 4 and CS-4
Feature
Support in the J200