White Paper
J200
45
November 2004
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is
supported.
Text clearing times are 10-20 seconds. 60-second
time-out limit for the user to clear the text.
‘Key’ responses:
•
‘Long NO’ – Proactive session terminated by
user.
•
‘NO’ – Backward move in proactive session.
•
Any other key clears display if the command is
performed successfully.
Get inkey
Prompt for a one-character input. Pressing ‘YES’
without entering a character gives warning mes-
sage “Minimum 1 character”.
‘Key’ responses:
•
‘CLR’ clears current character.
•
‘Long NO’ terminates the proactive session.
•
‘NO’ – Backward move in proactive session.
•
‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without
entering a character gives warning message
“Minimum ‘no.’ characters”. The phone will refuse
to accept further input when the maximum
response length is exceeded.
MMI Maximum Response lengths:
•
Digits Only – 160 characters
•
SMS default alphabet characters – 160 charac-
ters
•
Hidden Characters (digits only) – 11 characters
‘Key’ responses:
•
‘CLR’ clears current character/characters.
•
‘Long NO’ terminates the proactive session.
•
‘NO’ – Backward move in proactive session.
•
‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted
by the phone, it displays the message “Please
wait” and then restarts.
Subaddress DTMF support
Yes
'00' = set up call, but only if not currently busy on
another call
Yes
'01' = set up call, but only if not currently busy on
another call, with redial
Yes
'02' = set up call, putting all other calls (if any) on
hold
Yes
'03' = set up call, putting all other calls (if any) on
hold, with redial
Yes
'04' = set up call, disconnecting all other calls (if any) Yes
'05' = set up call, disconnecting all other calls (if any),
with redial
Yes
SET UP IDLE MODE
No
SET UP MENU
Yes
SMS PP DOWNLOAD
Yes
Service
Mode
Support in
J200
