Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/111 A
©
Sony Ericsson Mobile Communications AB
38(56)
Antenna asm
continued
Start the installation of the
antenna
by putting it against the
top of the
frame
.
Lower the
antenna
towards the bottom of the
frame
until it
becomes latched by the hooks.
Apply
9 Ncm
±
2 Ncm torque to tighten the two screws (1)
using theJCIS bit.
R
EPLACE THE SCREWS IN CASE THEY ARE DAMAGED
.
Make sure the
antenna
is properly mounted inside the
frame
and that the two hooks (2) are latched.
Follow the 4.1.1 – 4.1.10 Reassembly instructions!