To conserve battery life, the PS4™ system will
disconnect the Media Remote after 30 minutes
of activity.
• To reactivate, press any buttons to wake up
the Media Remote.
• If the batteries are just replaced, press the PS
button once to wake up the Media Remote.
5. Place the remote close to the PS4
™
system
and wait for “PDP Media Remote” to
appear in the device list.
6. Using a DUALSHOCK 4 Wireless Controller,
select “PDP Media Remote” from the list,
and press the “X” button. When prompted,
select “Yes”.
7. The red LED on the remote will illuminate for
3 seconds and then turn off, indicating
successful pairing.
8. If pairing is unsuccessful, repeat steps 3
through 6.
NOTE
•
For the latest PS4
™
usage instructions, refer to the
user’s guide for the PS4
™
system
(manuals.playstation.net/document/)
.
•
For the latest Media Remote instructions,
refer to the online user’s guide
(support.pdp.com)
.
•
Only one Media Remote can be
registered with the PS4
™
system at a time.
•
When you pair the Media Remote with
another PS4
™
system, registration with the
original PS4
™
system is cleared. To use the
remote with the original PS4
™
system, you will
have to follow the pairing procedure again.
TIPS
