1-2
DNW-75/75P
DNW-65/65P
1-4-2. Power Cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
Use the specified power cord only when connecting the
AC power.
Never use a injured power cord.
For customers in the U.S.A. and Canada:
1
Power cord 125 V 10 A (2.4 m):
!
1-557-377-11
2
Plug holder (Brown):
3-613-640-01
For customers in the United Kingdom:
1
Power cord 250 V 10 A (2.4 m):
!
1-782-165-11
2
Plug holder (Brown):
3-613-640-01
For customers in European countries except the United
Kingdom:
1
Power cord 250 V 10 A (2.4 m):
!
1-782-164-11
2
Plug holder (Brown):
3-613-640-01
If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.
1-3. Operating Conditions
1-4. Power Supply
1-3. Operating Conditions
c
Good air circulation is essential to prevent internal heat build-
up. Place the unit in location with sufficient air circulation.
Do not block the ventilation holes of the cabinet and the
front and rear panels.
Operating temperature: 5
d
C to 40
d
C
Operating humidity:
25% to 80% (non-condensing)
Storage temperature:
_
20
d
C to 60
d
C
Locations to avoid:
.
Areas where the unit will be exposed to direct sunlight
of any other strong lights.
.
Areas near heat sources.
.
Dusty areas or areas subject to vibration.
.
Areas with strong magnetic field.
.
Areas with much electrical noise.
.
Areas with much static electricity.
.
Areas that is impossible to find a specified room for
installation. (Refer to “1-5. Installation Space”.)
.
Areas windtight.
Tilt allowance:
Within 30
d
(Do not slant the front
and rear of the unit more than 30
d
.)
c
Fix the unit securely to avoid slipping if the unit is not
operated at horizonal place.
1-4. Power Supply
1-4-1. Voltage and Power Requirements
This unit’s power line has a switching regulator.
c
Be sure to operate the unit within the range of following
power voltage.
Power voltage:
AC 100 to 240 V
±
10%
Power frequency:
50 Hz or 60 Hz
Power consumption DNW-75/75P: 175 W (184 VA)
DNW-65/65P: 156 W (165 VA)
Rush current:
Power voltage 100 V IN: 10 A
Power voltage 240 V IN: 20 A
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.
AC inlet
2
1
2
1
AC inlet
2
1
AC inlet
