Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
D1
01
pp
PORT x ENC DMA1 ER-
ROR
The memory data transfer error occurred on DIO-95
board that is installed to the port “x” (Port A to D).
There is a possibility that the record is not normally
done.
• Probable cause: IC200 on DIO-95 board
• Protected operation: None
D1
03
pp
PORT x ENC PROC ER-
ROR
The encoding process error occurred on DIO-95 board
that is installed to the port “x” (Port A to D). There is a
possibility that the record is not normally done.
• Probable cause: IC1000, IC1200, IC1400,
IC1600, IC1800 on DIO-95 board
• Protected operation: None
2-2-8.
Main Code D2
When an error was detected during playback process, the following error occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
D2
03
pp
PORT x DEC PROC ER-
ROR
The decoding process error occurred on DIO-95 board
that is installed to the port “x” (Port A to D). There is a
possibility that the playback is not normally done.
• Probable cause: IC1000, IC1200, IC1400, IC1600
on DIO-95 board
• Protected operation: None
2-2-9.
Main Code D3
When an error was detected while writing to the internal memory, one of the following errors occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
D3
01
ss
SLOT Mx AV WRITE
ERROR1
A recording error of video and audio that originated in
the interface was detected in the internal memory.
• Probable cause 1: IC400 on MEC-40 board
• Probable cause 2: Internal memory
• Protected operation: None
D3
02
ss
SLOT Mx AV WRITE
ERROR2
A recording error of video and audio that originated in
the memory was detected in the internal memory.
• Probable cause: Internal memory
• Protected operation: None
2-2-10. Main Code D4
When an error was detected while reading from the internal memory, the following error occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
D4
01
ss
SLOT Mx AV READ
ERROR1
A playback error of video and audio that originated in
the interface was detected in the internal memory.
• Probable cause 1: IC400 on MEC-40 board
• Probable cause 2: Internal memory
• Protected operation: None
PWS-4400
2-8
