3-4.
SNMP Tab
3-4-1.
SNMP Menu
The SNMP menu is used to register names and locations belonging to the SNMP system group and IP address of trap
destination.
SNMP System Gp. Table
This table shows the SNMP object status of the unit.
Updating SNMP Object Values (SNMP SETs)
Register management information of the unit.
• System Contact text box
Enter the administrator of the unit.
• System Name text box
Enter the management name (domain name) of the unit.
• System Location text box
Enter the installation location of the unit.
• Submit button
Press the button to activate the changes.
• Cancel button
Press the button to cancel the change.
• Clear button
Press the button to clear entered information.
Updating SNMP Trap Object Values (SNMP SETs)
Set the trap destination.
The SNMP agent installed in the unit has a function to send events occurred in devices to the SNMP manager by using
a mechanism called trap.
The following describes how to register community name of SNMP and IP address of trap destination as trap transmission
settings.
• Community Name text box
Community name of SNMP
• Trap Destination IP Address 1 to Trap Destination IP Address 4 text boxes
IP address of trap destination SNMP manager
• Submit button
Press the button to activate the changes.
• Cancel button
Press the button to cancel the change.
• Clear button
Press the button to clear entered information.
The following describes specifications of the SNMP agent installed in this unit.
SNMP Version
SNMPv1
MIB definition
SMIv2
Support PDU
GetRequest, GetNextRequest, SetRequest, GetResponce, Trap
Standard MIB
MIB-2
Extended MIB
SONY-PRO-MIB
PWS-4400
3-6
