4-7-2.
SW-1628 Board
Preparation
1.
Refer to
Procedure
1.
Disconnect the flexible flat cable from the connector (CN001) on the SW-1628 board.
2.
Remove the three screws to detach the SW-1628 board in the direction of the arrow.
SW-1628 board
PSW3 x 6
(a)
(b)
(c)
CN001
Flexible flat cable
Note
When installing the SW-1628 board, tighten the three screws in the order of (a), (b), (c).
3.
Install the removed parts by reversing the steps of removal.
PWS-4400
4-27