42
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1
Press the PICTURE PROFILE button
C
.
2
Select the picture profile by turning the
SEL/PUSH EXEC dial
A
, then press
the dial.
3
Select [SETTING]
t
[RESET]
t
[YES]
t
[
RETURN]
t
[OK] by
the SEL/PUSH EXEC dial
A
.
Assigning the
functions to the
ASSIGN buttons
You may need to assign some functions to
the ASSIGN buttons. You can assign a
single function to each the ASSIGN button
1 to 6.
Functions you can assign to the
ASSIGN buttons
• MARKER (p. 66)
• D.EXTENDER (p. 63)
• FOCUS INFNTY (p. 43)
• REC REVIEW (p. 44)
• END SEARCH (p. 44)
• INDEX MARK (p. 44)
• PEAKING (p. 65)
• STEADYSHOT (p. 60)
• COLOR BAR (p. 60)
• SPOTLIGHT (p. 63)
• BACK LIGHT (p. 62)
• FADER (p. 63)
• DISPLAY (p. 47)
• Picture profile (p. 39)
• SHOT TRANS (p. 45)
b
Note
• The ASSIGN buttons 4 to 6 are exclusively used
for memory playback when the POWER switch
is set to VCR, and cannot be used as ASSIGN
buttons. You cannot assign functions to the
ASSIGN buttons 4 to 6 while the POWER
switch is set to VCR.
Changing the settings of your
camcorder recordings (Continued)
Summary of Contents for 1080i
Page 131: ......
