Ti
mer
23
GB
7
Press –
.
or
>
+
(or press
.
or
>
on the unit) repeatedly until the
music source you want appears in the
display.
Each time you press the button, the display
changes cyclically as follows:
TUNER
y
CD PLAY
y
TAPE PLAY
8
Press ENTER.
The type of timer (“PLAY TIMER”),
followed by the start time, the stop time and
the music source appears in the display.
9
Press
?/1
to turn off the system.
Other operations
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Timer will not be activated if the system is
turned on.
Tips
• The system turns on 15 seconds before the preset
time.
• When the Play Timer is selected, “PLAY” lights up
in the display.
You can record a preset radio station from a
specified time.
To make a timer recording, you must first preset
the radio station (see “Presetting radio stations”
on page 13) and set the clock (see “Setting the
clock” on page 9).
Use buttons on the remote for the operation.
1
Tune in the preset radio station
(see “Listening to the radio” on
page 15).
2
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
3
Press –
.
or
>
+ (or press
.
or
>
on the unit)
repeatedly to select
“REC SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press –
.
or
>
+ (or press
.
or
>
on the unit) repeatedly to set the hour,
then press ENTER.
The minute indication start flashes in the
display.
Press –
.
or
>
+ (or press
.
or
>
on the unit) repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer (“REC”), followed by
the start time, the stop time and the preset
radio station to be recorded (e.g., “TUNER
FM 5”) appears in the display.
6
Load a recordable tape into Deck B.
7
Press
?/1
to turn off the system.
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press –
.
or
>
+ (or
press
.
or
>
on the
unit) repeatedly to select
“PLAY SELECT?”, then
press ENTER.
Change the setting Start from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press –
.
or
>
+ (or
press
.
or
>
on the
unit) repeatedly to select
“TIMER OFF?”, then press
ENTER.
Timer recording radio
programs
continued
