13
GB
Ge
tting
Star
te
d –
B
A
SIC –
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
However, this system allows you to place the
center speaker up to 1.6 meters (5 ft) closer (
B
)
and the surround speakers up to 5.0 meters (16
ft) closer (
C
) to the listening position.
The front speakers can be placed from 1.0 to
7.0 meters (3 to 23 ft) (
A
) from the listening
position.
Place speakers as illustrated below.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Getting Optimal Surround Sound for a
Room” (page 57).
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
1
Turn on the TV.
2
Press
[
/
1
.
Note
• Make sure that the function is set to “DVD”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [
ENTER
] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 15) and perform
again.
Step 2: Positioning the
System
Step 3: Performing the
Quick Setup
"
/
1
DISPLAY
C
/
X
/
x
/
c
,
