29
GB
Ge
tting Star
te
d
Note
• When you use the TV (COAXIAL or OPTICAL
DIGITAL IN) jack (digital connection), the
digital connection takes priority.
2
Press SYSTEM MENU.
3
Press
X
/
x
repeatedly until “DEC.
MODE” appears in the front panel
display, then press
or
c
.
4
Press
X
/
x
repeatedly until the
decoding mode you want appears in
the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the “PRO LOGIC,”
“PLII MOVIE,” or “PLII MUSIC”
decoding mode.
For details, see page 30.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Note
• Depending on your TV, you may need to turn off your
TV’s speaker to enjoy surround sound of the system.
Tip
• When listening to audio files using a portable audio
source, you can enhance the sound.
Press FU/– to select “AUDIO.” Connect
the portable audio source. Select “A.F.D. STD” for
“DEC. MODE.”
To cancel, select other than “A.F.D. STD.”
Distortion may occur when you listen to a
component connected to the EURO AV
T
OUTPUT (TO TV), LINE jacks on the rear
panel, or to the AUDIO IN jack on the front
panel. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
1
Press FU/– repeatedly until
“TV,” “LINE,” or “AUDIO” appears in
the front panel display.
2
Press SYSTEM MENU.
3
Press
X
/
x
repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or
c
.
4
Press
X
/
x
to select a setting.
• “ATT ON”: You can attenuate the input
level. The output level is changed.
• “ATT OFF”: Normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Changing the input level of the
sound from connected
components